Portable measuring arm

Image of the portable measuring arm in the laboratory. Machine in the form of a pull-out arm placed on a tripod
Organizational Unit
MECHANICS WORKSHOP

Grants related:

Description

This portable measuring equipment consists of an extendable arm with a range of 2.4 m at the end of which there is a contact sensor. The precision of the measurements made is 51 microns.

Related Technical facility
General view of the Dimensional Metrology Laboratory with several measuring machines, one of bridge type on a table and another in the form of an arm on a tripod
Dimensional Metrology Laboratory
In the Dimensional Metrology Laboratory it is verified that the manufactured parts meet the required design specifications.
View of the head of the Laser Tracker System. Cylindrical device with optical and electronic components inside placed on a table
3D Laser Tracker System
Portable equipment for high precision measurements by optical means
View of a three-coordinate measuring machine in the laboratory. Granite table with a gantry machine with a meter sensor
3D coordinate measuring machines.
High precision three-coordinate measuring machines with and without contact
Related Capability
Image of an engineer working on the final assembly of the grisms wheel of the EMIR instrument in the laboratory. Large black metal wheel with holes for optical components
Design, development and manufacture of opto-mechanical systems and precision mechanics
The mechanical engineering team of the IAC has experience and knowledge to undertake the design, manufacture and assembly of high precision structures, mechanisms and opto-mechanical systems
Type
Mechanic
Equiment type
Meter

It may interest you

  • General view of the Mechanical Integration and Verification Laboratory. Medium-sized laboratory with work benches, electronic devices, mechanical tools and cabinets
    Mechanical Integration and Verification Laboratory
    The Mechanical Integration and Verification Laboratory provides the basic and specific infrastructures needed for the development and integration of the medium-sized mechanical systems developed at the Technology Division.
    Alberto
    Hernández González
  • Panoramic view of the CAD studio with engineers working with desktop computers
    CAD/CAE Studio
    The CAD/CAE room concentrates the special facilities for mechanical engineering design and calculation.
    Afrodisio
    Vega Moreno
  • Partial view of the mechanics workshop with technicians working. Author A. L. Aldai. Large workshop with several manufacturing machines and a technician on the right adjusting a piece in one of them
    Mechanics Workshop
    The Mechanics Workshop main purpose is the manufacture, measurement and assembly of mechanical parts.